Products
0
High Voltage Three-Phase Filter Capacitor
1.rated voltage:10kv.
2.Frequency: 50/60Hz.
3.Operating: indoor or outdoor.
4.Ambient temperature: -40°C ~ +45°C_x000b_( Freezing field can meet - 45C).
5.Wind load: not exceed 35m/s.
6.Altitude: not exceed 2000m.
7.Icing thickness: not exceed 10mm.
8.Seismic strength: 8.
9.Pollution level: III or IV.
10KV Single-Phase Tuning Filter Capacitor
1.Equipped with discharge resistors.
2.New structures and new technology, high reliability.
3.Low noise, high resistance to overload ability, electric property have reached the international advanced level.
4.With the international advanced technology of internal fuses, ensure product operation reliability. Improved the connection method of discharge resistance and solved the over-voltage problem of series section.
5.No leakage, new type of bushings automatic argon arc welding tanks.
Harmonic Mitigation Capacitor
1.Equipped with discharge resistors.
2.New structures and new technology, high reliability.
3.Low noise, high resistance to overload ability, electric property have reached the international advanced level.
4.With the international advanced technology of internal fuses, ensure product operation reliability. Improved the connection method of discharge resistance and solved the over-voltage problem of series section.
5.No leakage, new type of bushings automatic argon arc welding tanks.
High Voltage Filter Capacitor
1.Equipped with discharge resistors.
2.New structures and new technology, high reliability.
3.Low noise, high resistance to overload ability, electric property have reached the international advanced level.
4.With the international advanced technology of internal fuses, ensure product operation reliability. Improved the connection method of discharge resistance and solved the over-voltage problem of series section.
5.No leakage, new type of bushings automatic argon arc welding tanks.
capacitors connected in parallel
1.Rated Voltage:6kV,10kV,35kV.
2.Rated Capacity:1-100Mvar(per bank).
3.The capacitor is mainly consisted of container and device body.
4.The core is consisted of severalelements and insulation parts. The element is rolled, pressed andmade of two aluminum foilsand somepiece of thin dielectric polypropylene films sandwiched betweenthe two aluminum foils. In order to reach the differentdemand of voltage and capacity, the elements in core is connected by someseriesand parallelmethod. The technology of aluminum foiledge folding and protruding weldingare used to reduce the loss and increase the performance of partial discharging.
capacitors parallel
1.Rated Voltage:6kV,10kV,35kV.
2.Rated Capacity:1-100Mvar(per bank).
3.The capacitor is mainly consisted of container and device body.
4.The core is consisted of severalelements and insulation parts. The element is rolled, pressed andmade of two aluminum foilsand somepiece of thin dielectric polypropylene films sandwiched betweenthe two aluminum foils. In order to reach the differentdemand of voltage and capacity, the elements in core is connected by someseriesand parallelmethod. The technology of aluminum foiledge folding and protruding weldingare used to reduce the loss and increase the performance of partial discharging.
capacitor series and parallel
1.Rated Voltage:6kV,10kV,35kV.
2.Rated Capacity:1-100Mvar(per bank).
3.The capacitor is mainly consisted of container and device body.
4.The core is consisted of severalelements and insulation parts. The element is rolled, pressed andmade of two aluminum foilsand somepiece of thin dielectric polypropylene films sandwiched betweenthe two aluminum foils. In order to reach the differentdemand of voltage and capacity, the elements in core is connected by someseriesand parallelmethod. The technology of aluminum foiledge folding and protruding weldingare used to reduce the loss and increase the performance of partial discharging.
Arc Furnace Compensation Capacitor
1.Frequency 60Hz.
2.Capacitance Deviation -5%~+10%.
3.Max Current 2.5×In.
Equipped with discharge resistors 4.Integrated with independent over-voltage protection devices.
5.Superior self-healing performance and extended service life.
6.Low-loss factor, dry-type design with leakage-free construction.
7.Equipped with discharge resistors._1776665894137.png)
Square Capacitor for Reactive Power Compensation
1.Rated Voltage(Ue)：100v~1000v .
2.Installation Indoor.
3.Case material Galvanized steel sheet.
4.Output Range 10~100kvar.
5.Frequency 50/60Hz.
6.Connection configuration D, Y, YN, III.
7.Terminal Block ：M6, M8, M10 (According to capacitor power).
8.Lose tanδ<0.001 (20°C 50Hz).
9.Temprature -25°C~50°C.
10.Highest Altitude 2000m.
11.Capacitor (to wall) pitch ≥50mm.
12.Capacitance Deviation -5%~+10%.
Dry Type Reactive Compensation Capacitor
1.Rated Voltage(Ue)：250v~525v, up to 2000v.
2.Frequency：50/60Hz.
3.Compact design，equipped with grounding bolt.
4.Potting material: PU resin (soft resin).
5.Easy installation and wiring.
6.Small size, Light weight.
7.Self-healing, Maintenance-free.
110KV Capacitive Voltage Transformer
1.High electric strength. Wide insulation marginHigh-quality medium and new structure design application and advanced technology, the electric strength of CVT is improved obviously, guarantee the product operation reliability effectively.
2.Long creepage distance. Strong pollution resistance
3.High mechanical strength capacitor insulator and optimized structure design, it improves product mechanicalstrength.
4.Good transient response Damping optimu design, the CVT transient response to 3pTl level, the residual voltage is less than 2%. Can betteradapt to requirements of fast relay.
5.Small dielectric loss products.
69 72.5kV Capacitive Voltage Transformer
1.High electric strength. Wide insulation marginHigh-quality medium and new structure design application and advanced technology, the electric strength of CVT is improved obviously, guarantee the product operation reliability effectively.
2.Long creepage distance. Strong pollution resistance
3.High mechanical strength capacitor insulator and optimized structure design, it improves product mechanicalstrength.
4.Good transient response
Damping optimu design, the CVT transient response to 3pTl level, the residual voltage is less than 2%. Can betteradapt to requirements of fast relay.
5.Small dielectric loss products.
